 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SURMOUNTTM Low Barrier Silicon Schottky Cross-Over Quad Series V 1.00 MA4E2544L-1282 Features Extremely Low Parasitic Capitance and Inductance Surface Mountable in Microwave Circuits, No Wirebonds Required n Rugged HMIC Construction with Polyimide Scratch Protection n Reliable, Multilayer Metalization with a Diffusion Barrier, 100% Stabilization Bake (300 C, 16 hours) n Lower Susceptibility to ESD Damage n n Case Style 1282 - Topview A B Description The MA4E2544L-1282 Series SurMountTM Low Barrier, Silicon Schottky Cross-Over Quad Diodes are fabricated with the patented Heterolithic Microwave Integrated Circuit (HMIC) process. HMIC circuits consist of Silicon pedestals which form diodes or via conductors embedded in a glass dielectric, which acts as the low dispersion, low loss, microstrip transmission medium. The combination of silicon and glass allows HMIC devices to have excellent loss and power dissipation characteristics in a low profile, reliable device. The Surmount Schottky devices are excellent choices for circuits requiring the small parasitics of a beam lead device coupled with the superior mechanical performance of a chip. The SurMount structure employs very low resistance silicon vias to connect the Schottky contacts to the metalized mounting pads on the bottom surface of the chip. These devices are reliable, repeatable, and a lower cost performance solution to conventional devices. They have lower susceptibility to electrostatic discharge than conventional beam lead Schottky diodes. The multi-layer metalization employed in the fabrication of the Surmount Schottky junctions includes a platinum diffusion barrier, which permits all devices to be subjected to a 16-hour non-operating stabilization bake at 300 C. The " 0505 " outline allows for Surface Mount placement and multi- functional polarity orientations. C D E D Inches Millimeters Dim A B C D Sq. E Min. 0.0445 0.0445 0.0040 0.0128 0.0128 Max. 0.0465 0.0465 0.0080 0.0148 0.0148 Min. 1.130 1.130 0.102 0.325 0.325 Max. 1.180 1.180 0.203 0.375 0.375 Equivalent Circuit Applications The MA4E2544L-1282 Series SurMountTM Low Barrier Silicon Schottky Cross-Over Quad Diodes are recommended for use in microwave circuits through Ku band frequencies for lower power applications such as mixers, sub-harmonic mixers, detectors and limiters. The HMIC construction facilitates the direct replacement of more fragile beam lead diodes with the corresponding Surmount diode, which can be connected to a hard or soft substrate circuit with solder. 1 SurMountTM Low Barrier Silicon Schottky Diodes: Cross-Over Quad Series MA4E2544L-1282 V 1.00 Electrical Specifications @ 25 C (Measured as Single Diodes) Model Number MA4E2544L-1282 Type Recommended Vf @ 1 mA Ct @ 0 V Frequency ( mV ) ( pF ) Range DC - 18 GHz 330 Max 300 Typ 0.22 Max 0.15 Typ Rt Slope Resistance ( Vf1 - Vf2 )/(10.5 mA-9.5 mA ) () 16 Typ 20 Max Low Barrier Rt is the dynamic slope resistance where Rt = Rs + Rj, where Rj = 26 / Idc (Idc is in mA) and Rs is the Ohmic Resistance Max Forward Voltage Difference Vf @ 1 mA: 10 mV Handling All semiconductor chips should be handled with care to avoid damage or contamination from perspiration and skin oils. The use of plastic tipped tweezers or vacuum pickups is strongly recommended for individual components. The top surface of the die has a protective polyimide coating to minimize damage. The rugged construction of these SurMount devices allows the use of standard handling and die attach techniques. It is important to note that industry standard electrostatic discharge (ESD) control is required at all times, due to the sensitive nature of Schottky junctions. Bulk handling should insure that abrasion and mechanical shock are minimized. Die Bonding Die attach for these devices is made simple through the use of surface mount die attach technology. Mounting pads are conveniently located on the bottom surface of these devices, and are opposite the active junction. The devices are well suited for higher temperature solder attachment onto hard substrates. 80Au/20Sn and Sn63/Pb37 solders are acceptable for usage. Die Attach For Hard substrates, we recommend utilizing a vacuum tip and force of 60 to 100 grams applied uniformly to the top surface of the device, using a hot gas bonder with equal heat applied across the bottom mounting pads of the device. When soldering to soft substrates, it is recommended to use a lead-tin interface at the circuit board mounting pads. Position the die so that its mounting pads are aligned with the circuit board mounting pads. Reflow the solder paste by applying Equal heat to the circuit at both die-mounting pads. The solder joint must Not be made one at a time, creating un-equal heat flow and thermal stress. Solder reflow should Not be performed by causing heat to flow through the top surface of the die. Since the HMIC glass is transparent, the edges of the mounting pads can be visually inspected through the die after die attach is completed. Absolute Maximum Ratings1 @ +25 C Parameter Operating Temperature Storage Temperature Junction Temperature Forward Current Reverse Voltage (10 m) RF C.W. Incident Power RF & DC Dissipated Power Value -40 C to +150 C -40 C to +150 C +175 C 20 mA 5V + 20 dBm 50 mW 1. Exceeding any of these values may result in permanent damage 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300 SurMountTM Low Barrier Silicon Schottky Diodes: Cross-Over Quad Series MA4E2544L-1282 V 1.00 MA4E2544L-1282 Low Barrier SPICE PARAMETERS (per Diode)* Is (nA) 26 Rs () 12.8 N 1.20 Cj0 ( pF ) 1.0 E-2 M 0.5 Ik (mA) 14 Cjpar (pF) 9.0 E-2 Vj (V) 8.0 E-2 FC 0.5 BV (V) 5.0 IBV (mA) 1.0 E-2 * Spice parameters (per Diode) are based on the MA4E2502 Series datasheet. Circuit Mounting Dimensions (Inches) 0.020 0.020 0.020 0.020 0.013 0.013 0.020 0.020 Ordering Information Part Number MA4E2544L-1282W MA4E2544L-1282 MA4E2544L-1282T Package Wafer on Frame Die in Carrier Tape/Reel 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300 SurMountTM Low Barrier Silicon Schottky Diodes: Cross-Over Quad Series MA4E2544L-1282 V 1.00 MA4E2544L-1282 Schematic Per Diode Ct Ls Rs Rj Average Schematic Values per Diode Model Number MA4E2544L-1282 Ls (nH) 0.2 Rs ( ) 12.8 Rj ( ) 26 / Idc Ct ( pF ) 0.15 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1908) 574 200, Fax+44 (1908) 574 300 |
Price & Availability of MA4E2544L-1282W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |